Skip to content
Vecaria
Go Pro

LAS, LAZ and COPC — Point Cloud Formats

LiDAR and photogrammetry point clouds come in three closely related containers. All three carry per-point XYZ plus attributes — classification, intensity, and RGB when the sensor records it — but they differ in compression and in how they can be read.

LAS is the ASPRS standard point cloud format. It is uncompressed: each point record is stored verbatim, so files are large but any tool can read them sequentially. If you receive a LAS file you can open it directly.

LAZ is the compressed form of LAS — the same point records, losslessly compressed. Files are much smaller but must be decompressed before the points are available. Practically all LAS-producing tools also write LAZ.

COPC (Cloud Optimized Point Cloud) is a LAZ file with an internal spatial index: points are stored in a hierarchy of nodes, so a viewer streams only the level of detail and region it needs instead of unpacking the whole file. COPC is the right container for very large surveys served over a network.

You do not choose a format — you receive one. Match the viewer to the file: the LAS viewer opens uncompressed files, the LAZ viewer decompresses locally, and the COPC viewer streams the indexed hierarchy. All three render in the browser with the same colour modes (elevation, intensity, classification, RGB), class filtering, clip boxes and profile sections.

  • LAS Point Cloud Export — convert an uncompressed LAS to PLY, OBJ, CSV, XYZ or JSON locally. PLY, CSV and JSON keep intensity and classification (RGB when present); OBJ and XYZ carry coordinates only. CSV, XYZ and TXT point lists pack back into LAS 1.1 the other direction. Exports carry real-world coordinates but no CRS metadata — set the CRS in your downstream software.
  • Compressed LAZ must be decompressed to plain LAS first; the LAS export tool does not read LAZ.
  • LAS Filter — keep only the classes you need (ground, vegetation, buildings) before exporting, so the deliverable is small and on-topic.

Reading point clouds in GIS and 3D software

Section titled “Reading point clouds in GIS and 3D software”

CSV opens in QGIS or Excel as a table of coordinates; PLY opens in CloudCompare or MeshLab with attributes; OBJ gives 3D apps a plain point set. For heightmaps instead of point clouds, see LAS Heightmap.